I recommend to block all UN-necessary services like www, ftp, ssh.

ip neighbor discovery set ether1 discover=no You can also disable Network Neighbor Discovery on the interface to which your network users are connected Make sure to change this ip address to match your management pc ip. The above rules will disable Mikrotik discovery via winbox, and also it will allow 192.168.2.6 to access Mikrotik.

Or disable MAC Discovery for all interfaces by using followingĪdd action=drop chain=input comment='Block mikrotik discovery/zaib' disabled=no dst-port=5678 protocol=udpĪdd action=drop chain=input comment='DROP ALL WINBOX REQUEST By MAC Address' disabled=no dst-port=20561 protocol=udpĪdd action=drop chain=input comment='DROP ALL WINBOX REQUEST EXCEPT FROM MY PC' disabled=no dst-port=8291 protocol=tcp src-address=!192.168.2.6 You can add specific interfaces, and disable the all entry To disable winbox access using mac address you have to disable mac-server on the NIC If you do not wish to have MAC Filtering on for your network, simply turn it off or disable it.To hide your mikrotik from being appearing in WINBOX scan neighbor list, & to limit WINBOX access from your specific IP address or admin PC only,

If MAC Filtering is on or enabled, you will need to add your Nintendo system's MAC Address to the list of allowed devices and save or apply this change.

For proper addressing the router also needs the network mask value, id est which bits of the complete IP address refer to the address of the host, and which - to the address of the network. Typical (IPv4) address consists of four octets.

Depending on your router, MAC Filtering may also may be referred to as MAC Address Control, Address Reservation, or Wireless MAC Authentication. IP addresses serve for general host identification purposes in IP networks ( RFC 791 ).

This is most often found within a router's Wireless or Wireless Security options.

Search through your router's settings until you locate the tab or setting MAC Filtering. Adapaun approach to piece the MAC adrress of this rebel client.

If you wish to use this feature on your network, we recommend you contact the router manufacturer for assistance in setting this up.

For troubleshooting purposes, you do not need to enable MAC Filtering if this is already disabled.

If MAC Filtering is enabled on a wireless router, any wireless devices connected to that router will be unable to connect until their MAC address is entered into the MAC Filter settings.

Block mac address mikrotik